How to properly install a bathtub?
How to properly install a bathtub?
Here is How to install a bathtub against a wall or in a corner in 7 steps:
- Install the mixer.
- Fix the feet.
- To set down retaining brackets.
- Install dump.
- Connect the bathtub to evacuation.
- To set down apron.
- Complete the installation.
How to install a bathtub?
The installation involves laying it level, fixing the seat against the walls, connecting the siphon, designing the cladding with inspection hatch or laying the apron, then sealing it with the silicone seal. See the bathtubs and their installation accessories! The bathtub is a key element of the bathroom.
How to install a bathtub in a bathroom?
Grouting the bathtub Installing a bathtub in a bathroom is carried out in several stages. The installation involves laying it level, fixing the seat against the walls, connecting the siphon, designing the cladding with inspection hatch or laying the apron, then sealing it with the silicone seal.
How to choose the right bathtub?
The bathtub must be perfectly level (by checking with a spirit level) and the upper edge must coincide with the previously drawn lines. The feet allow the bath to be leveled at the front and to maintain its seat. They are screwed or unscrewed by hand or with a wrench.
How to install a whirlpool bath?
Depending on their length, screw the cleats to the walls every 20 to 40 cm with dowels suitable for the support. A seal strip can be applied to the cleat (compulsory on whirlpool baths to reduce vibration) before installing the bath.
