When to install a fence?
When to install a fence?
As a general rule, thefacility of one fence is possible between May and the end of November. It is important that the ground is not frozen in order to allow the digging and casting of the main posts.
Why fence your garden?
The mere presence of a fence if it can make it possible to considerably reduce the percentage of intrusion and burglaries also contributes to guaranteeing your intimacy in particular in your gardenin the same way as other concealment processes, such as the screen, the reed or the hedge…
Where to place your fence?
The fence can very well be placed just at the limit of the property or below, this does not constitute a new delimitation. Only the demarcation is authentic in this matter. The neighbor cannot oppose its installation as long as it does not encroach on his own land.
How to fix a fence post on a low wall?
Position the plate: Position the first plate in the center of your low wall so that the post is level. Trace the positions of the holes in order to drill them. Pierce the low wallposition the pegs then to stare the plate using the supplied nuts. To stare the post to the plate.
How to maintain a fence?
The less distance there is between the posts, the stronger the fence. Determine the location of the fence by marking the ground with stakes and rope or with spray paint.
How to decorate a fence?
Determine the location of the fence by marking the ground with stakes and rope or with spray paint. Mark at regular intervals the location of the posts of the future fence.
How tall is a fence panel?
In order to respect the normal conditions of use of our products, it is not possible to produce panels over 1.80m in height. CAN WE RE-SIZE THE EQUIPMENT? Headbands, posts, slats are to be readjusted by you according to your selected fence heights and of course the length of each element to be closed.
How to choose the right fence?
Mark at regular intervals the location of the posts of the future fence. Check the manufacturer’s recommendations for the distance between the holes. Dig holes 8″ to 10″ in diameter and 3′ 6″ to 4′ deep to avoid displacement due to frost and to obtain the best stability.
